Document Tree
Document Properties
Last Modified
Added to KB
Public Access
Doc Type
  • ICM 7.10
  • ICM 11
  • ICM 12
Guide - Pipeline Security


Since pipeline execution can be triggered from external sources via an URL, special care is necessary to secure pipelines, making sure that a pipeline responds only to requests from authorized clients.

Public, Private and Include Start Nodes

The configuration parameters for a start node include the call mode parameter. The call mode determines whether a pipeline can be triggered from an external source using HTTP requests, or from an internal source only using call or jump nodes. The call mode parameter for start nodes can take the following values:

  • Public
    for access from an external source such as the storefront, using (for example) HTTP requests.
    Example for a public call:

    <a href=“#URL(Action(‚ViewHomePage-Start‘))#“>…</a>

    Such a public request allows only to call a public start node.

  • Include
    for access via remote include calls (Web Adapter includes, <WAINCLUDE>).
    Example for a include call:

    <isinclude url=“#URL(Action(‚PipelineXyz-Start‘)#”>

    An included request allows to call a public or an include start node.

  • Private
    for access from an internal source such as another pipeline, using call or jump nodes.
    Example for a internal call:

    <ispipeline pipeline=”ProcessPagelet-TemplateCallback” params=”#ParamMap#”>

    An internal request allows to call a public, an include or a private start node.

For example, many viewing pipelines are triggered by external sources via HTTP requests, hence need to have a public start node. On the other hand, processing pipelines are typically called from viewing pipelines. Therefore, processing pipelines typically have private start nodes.

Prefix Pipelines

Prefix pipelines are generic pipelines which perform certain checks before the pipeline that has actually been requested is executed. Prefix pipelines therefore provide a powerful mechanism to prevent unauthorized access to public pipelines.

Intershop 7 supports so-called site prefix pipelines. The site preference value SitePrefixPipeline specifies the name of a pipeline which is automatically called before any public pipeline in the site is executed. The default value is set to the CorePrefix pipeline. See the figure below for details on this pipeline.

The pipelet processor checks the SitePrefixPipeline preference value only once, the first time a pipeline in the site is executed. The SitePrefixPipeline preference value is re-read only if the pipelines of the site or all pipelines in the system are reloaded.

If a pipeline is executed and the site's SitePrefixPipeline preference value contains a prefix pipeline name, the prefix pipeline is looked up in the normal manner and is then executed. This also means that a prefix pipeline can be overloaded in the usual way.
Different versions of the prefix pipeline can be defined using the start nodes:

  • process,
  • view, or
  • backoffice.

These different versions are executed depending on the type of the pipeline ( Process, View, or Backoffice) triggering the prefix pipeline.

For example, if the original pipeline being executed is of type Process, a start node process is searched for in the prefix pipeline. If the system cannot find one, the pipelet processor looks for a default start node named Start. The name of the originally called pipeline and the start node name are put into the prefix pipeline dictionary using the CurrentPipelineName and CurrentStartNodeName keys.


The pipeline type is stored in the pipeline's XML descriptor file. By default, the pipeline types are stored in lower case letters (e.g., <type>process</type>. Since the pipeline lookup mechanism is case sensitive, the respective prefix pipeline start nodes must be lower case as well.

The originally called pipeline is not executed after the site prefix pipeline if the following happens:

  • The site prefix pipeline ends with an interaction
  • The site prefix pipeline ends with an exception, in which case the error handler of the site prefix pipeline is looked up and executed

If the site prefix pipeline ends with a named end node, the originally called public pipeline is executed. The SitePrefixEndNodeName value of the site prefix pipeline is passed to the dictionary. The values of the site prefix pipeline dictionary are available to the original pipeline as well.

CorePrefix Pipeline

The CorePrefix pipeline is a prefix pipeline which is provided as a default. The pipeline checks if a user has the required permission to run a called pipeline. This is, basically, a two-step process:

  • First, the CorePrefix pipeline determines the permissions that are required to execute the called pipeline at the specified start node in the given site context.
  • Then, it checks whether the current user's permissions match the previously determined permissions. If so, the called pipeline will be executed; if not, the execution is denied and an error page will be displayed.

The permissions themselves are configured in the file, located in the pipeline directory of every cartridge, and pre-loaded during the pipeline cache initialization.

Pipeline Access Control Lists

If a pipeline requires a permission of the requester to execute the pipeline in general, or a specific start node of this pipeline, the pipeline's cartridge contains a file. The file includes the access control list (ACL) for every pipeline of the cartridge or site whose access should be restricted. These access control lists are loaded into the pipeline cache upon server startup or pipeline reload.
The located in

  • <IS_HOME>\share\system\cartridges\<cartridge_name>\release\pipelines
    for cartridge pipelines, or
  • <IS_HOME>\share\system\sites\<site_name>\1\pipelines
    for pipelines directly bound to a specific site.

ACL Lookup Process

As pipelines are always executed within a site context, the common pipeline lookup and overload mechanism must apply to the ACL lookup as well. The following steps are performed:

  1. all available sites in the system are determined
  2. the site specific ACLs are read from the located in the site's pipeline directory and stored into the site pipeline cache
  3. the cartridges that are currently loaded in the given site are determined


    The order within the list of cartridges bound to a site is relevant. The system sequentially searches for cartridge resources in a top-down manner, starting with the first cartridge in the list.

  4. for each cartridge in the list, the pipeline ACLs are loaded sequentially
    Since a cartridge can be loaded in several sites, the cache prevents from loading the ACLs of the same cartridge again and again.
  5. Each loaded entry of the cartridge's ACL file is checked against the site pipeline cache
    Only those entries that have not already been added to the cache are added. Thus, ACLs can be overloaded like pipelines by adding the access control list to a cartridge which is on top of the lookup list or to the ACL list of the site.

The access control list lookup also considers cartridges and sites that do not define any pipelines. In this case, the cartridge's or site's pipeline directory only contains the file This allows developers to overload the ACLs of pipelines by their project specific cartridges or sites.

ACL Syntax

The files must match a specific syntax. As all properties files, they are made of key-value pairs. The files define the required permission for each pipeline-start node combination.
The following lines illustrate the ACL syntax:

Syntax of files
<-- permission list for a given context for a specific start node of a pipeline -->
<-- permission list for a given context for an entire pipeline -->

The key is PipelineName-StartNodeName. The value is a semicolon separated list of Context:PermissionID pairs. In addition, you can define a default access control list for each pipeline without a start node, or an empty access control list for a pipeline.

Examples from the of sld_enterprise_app cartridge

The entries for ViewCatalog-Edit, ViewCatalog-Dispatch and ViewCatalog are treated as independent entries and are not merged during the cache initialization.
A call for ViewCatalog-Edit returns Channel:NONE;Organization:SLD_VIEW_CATALOGS(the context Channel denotes PrimeTech-Specials and the context Organization denotes PrimeTech), a call for ViewCatalog-Dispatch returns an empty list.
A call for ViewCatalog returns Channel:NONE;Organization:SLD_MANAGE_CATALOGS which is the pipelines fallback if a specific start node of the pipeline is not listed in the file.
The context Enterprise of the pipeline ViewCatalogCategoryEditing means both, the Organization context and the Channel context.


Permissions are always checked against an AuthorizationObject, i.e., a context, and that one or more permissions need to be checked before a pipeline is executed upon a user's request. This behavior is represented in the Context:PermissionID values. Context defines the authorization object used to check the permission specified in PermissionID.

For example, the ACL:


means that if a user wants to start the pipeline ViewCatalog via the start node Edit, the permission SLD_VIEW_CATALOGS must be checked against the authorization object Organization. The number of Context:PermissionID pairs per access control list is not limited, but a Context:PermissionID pair should not appear more than one time in an access control list.

See the Intershop Studio User Guide- Creating Pipelines | Manage Pipeline Access Control for detailed information on how to manage the permissions of the access control list. The Intershop Studio User Guide is available as Online Help of Intershop Studio.

The information provided in the Knowledge Base may not be applicable to all systems and situations. Intershop Communications will not be liable to any party for any direct or indirect damages resulting from the use of the Customer Support section of the Intershop Corporate Web site, including, without limitation, any lost profits, business interruption, loss of programs or other data on your information handling system.
The Intershop Knowledge Portal uses only technically necessary cookies. We do not track visitors or have visitors tracked by 3rd parties. Please find further information on privacy in the Intershop Privacy Policy and Legal Notice.
Knowledge Base
Product Releases
Log on to continue
This Knowledge Base document is reserved for registered customers.
Log on with your Intershop Entra ID to continue.
Write an email to if you experience login issues,
or if you want to register as customer.